Gecko [ www.omxrelocation.in ]

Name	Size	Permission
p2p	[ DIR ]	drwxr-xr-x
60_wpa_supplicant	267 B	-rwxr-xr-x
dbus-listen-preq.py	1.53 KB	-rw-r--r--
ieee8021x.conf	269 B	-rw-r--r--
openCryptoki.conf	1.12 KB	-rw-r--r--
p2p-action-udhcp.sh	1.68 KB	-rwxr-xr-x
p2p-action.sh	2.63 KB	-rwxr-xr-x
p2p-nfc.py	19.73 KB	-rw-r--r--
plaintext.conf	133 B	-rw-r--r--
udhcpd-p2p.conf	2.86 KB	-rw-r--r--
wep.conf	170 B	-rw-r--r--
wpa-psk-tkip.conf	181 B	-rw-r--r--
wpa2-eap-ccmp.conf	284 B	-rw-r--r--
wpas-dbus-new-getall.py	1.7 KB	-rw-r--r--
wpas-dbus-new-signals.py	5.93 KB	-rw-r--r--
wpas-dbus-new-wps.py	2.17 KB	-rw-r--r--
wpas-dbus-new.py	4.17 KB	-rw-r--r--
wpas-test.py	2.51 KB	-rw-r--r--
wps-ap-cli	1.15 KB	-rwxr-xr-x
wps-nfc.py	15.31 KB	-rw-r--r--

Code Editor : udhcpd-p2p.conf

# Sample udhcpd configuration file (/etc/udhcpd.conf)

# The start and end of the IP lease block

start 		192.168.42.20	#default: 192.168.0.20
end		192.168.42.254	#default: 192.168.0.254

# The interface that udhcpd will use

interface	wlan2		#default: eth0

# The maximim number of leases (includes addressesd reserved
# by OFFER's, DECLINE's, and ARP conficts

#max_leases	254		#default: 254

# If remaining is true (default), udhcpd will store the time
# remaining for each lease in the udhcpd leases file. This is
# for embedded systems that cannot keep time between reboots.
# If you set remaining to no, the absolute time that the lease
# expires at will be stored in the dhcpd.leases file.

#remaining	yes		#default: yes

# The time period at which udhcpd will write out a dhcpd.leases
# file. If this is 0, udhcpd will never automatically write a
# lease file. (specified in seconds)

#auto_time	7200		#default: 7200 (2 hours)

# The amount of time that an IP will be reserved (leased) for if a
# DHCP decline message is received (seconds).

#decline_time	3600		#default: 3600 (1 hour)

# The amount of time that an IP will be reserved (leased) for if an
# ARP conflct occurs. (seconds

#conflict_time	3600		#default: 3600 (1 hour)

# How long an offered address is reserved (leased) in seconds

#offer_time	60		#default: 60 (1 minute)

# If a lease to be given is below this value, the full lease time is
# instead used (seconds).

#min_lease	60		#defult: 60

# The location of the leases file

#lease_file	/var/lib/misc/udhcpd.leases	#defualt: /var/lib/misc/udhcpd.leases

# The location of the pid file
pidfile	/var/run/udhcpd-wlan2.pid	#default: /var/run/udhcpd.pid

# Every time udhcpd writes a leases file, the below script will be called.
# Useful for writing the lease file to flash every few hours.

#notify_file				#default: (no script)

#notify_file	dumpleases 	# <--- useful for debugging

# The following are bootp specific options, setable by udhcpd.

#siaddr		192.168.0.22		#default: 0.0.0.0

#sname		zorak			#default: (none)

#boot_file	/var/nfs_root		#default: (none)

# The remainer of options are DHCP options and can be specifed with the
# keyword 'opt' or 'option'. If an option can take multiple items, such
# as the dns option, they can be listed on the same line, or multiple
# lines. The only option with a default is 'lease'.

#Examles
opt	dns	192.168.2.1
option	subnet	255.255.255.0
option	domain	atherosowl.com
option	lease	864000		# 10 days of seconds

# Currently supported options, for more info, see options.c
#opt subnet
#opt timezone
#opt router
#opt timesvr
#opt namesvr
#opt dns
#opt logsvr
#opt cookiesvr
#opt lprsvr
#opt bootsize
#opt domain
#opt swapsvr
#opt rootpath
#opt ipttl
#opt mtu
#opt broadcast
#opt wins
#opt lease
#opt ntpsrv
#opt tftp
#opt bootfile

# Static leases map
#static_lease 00:60:08:11:CE:4E 192.168.0.54
#static_lease 00:60:08:11:CE:3E 192.168.0.44

${this.title}

Code Editor : udhcpd-p2p.conf